Flood Response - Construct/Remove Dike Closures, Vicinity of Morris, MB

This Tender is intended to:
1. Establish a binding contract for unit prices with the low Bidder to undertake flood response activities for
a SPRING flood event for the communities identified in this Contract.
2. Establish a non-binding call-out list for unit prices for all qualified bidders to undertake flood response
activities for possible future SUMMER and/or FALL flood events in the communities identified in the
Contract.
The Work in this Non-Bonded Tender No.: RF-97-118 is generally described below:
The Work in this Tender is part of the Province’s flood fighting efforts and mainly consists of the construction
and removal of clay closures at the openings of the permanent flood protection dikes surrounding Morris and
Aubigny, MB should they be required.
Manitoba will make every effort to maximize the time period during which important commerce routes on
highways remain open, while not compromising the safe and effective closure of such ring dikes.
The Contractor shall provide specified equipment able to complete the following work activities as required, as
directed by Manitoba, including but not limited to:
• Prepare, excavate, load, haul and place borrow material
• Dike repair, maintenance and emergent work
• Removal of placed borrow material and site clean up, repair and remediation
• Traffic Management
Due to the nature of flood events, the exact scale, timing and extent of the work is largely unknown. There is no
guarantee of quantities. Should dike closures not be required, equipment will not be mobilized and no payment
will be made.
The Work is fully detailed in the Reference Documents on the following page of this Tender.
A drawing of the Community, noting possible closure locations and potential borrow areas, is appended to this
document.

1. code : 7040
   description : Group 13 Hydraulic Excavator
   quantity : 8
   unitOfMeasure : Hour
   


2. code : 7030
   description : Group 12 Hydraulic Excavator
   quantity : 8
   unitOfMeasure : Hour
   


3. code : 7000
   description : Group 9 Hydraulic Excavator c/w Twist Bucket
   quantity : 8
   unitOfMeasure : Hour
   


4. code : 7001
   description : Group 9 Hydraulic Excavator c/w Twist Bucket
   quantity : 8
   unitOfMeasure : Hour
   


5. code : 7150
   description : Group 10 Crawler Tractor c/w Hyd. Tilt Dozer and Rear Mounted Ripper
   quantity : 8
   unitOfMeasure : Hour
   


6. code : 7110
   description : Group 6 Crawler Tractor c/w 6 Way Dozer and Rear Mounted Ripper
   quantity : 8
   unitOfMeasure : Hour
   


7. code : 7111
   description : Group 6 Crawler Tractor c/w 6 Way Dozer
   quantity : 8
   unitOfMeasure : Hour
   


8. code : 7100
   description : Group 5 Crawler Tractor c/w 6 Way Dozer and LGP
   quantity : 8
   unitOfMeasure : Hour
   


9. code : 7310
   description : Group 5 Loader Skid Steer c/w Tracks, Bucket, Forks, Sweeper and Power Rake
   quantity : 4
   unitOfMeasure : Hour
   


10. code : 7400
    description : Group 4 Loader – Rubber Tire c/w Bucket and Forks
    quantity : 4
    unitOfMeasure : Hour
    


11. code : 7401
    description : Group 4 Loader – Rubber Tire c/w Bucket and Forks
    quantity : 4
    unitOfMeasure : Hour
    


12. code : 7500
    description : Group 4 Motor Grader
    quantity : 2
    unitOfMeasure : Hour
    


13. code : 7600
    description : Group 4 Self-Propelled Vibratory Steel Packer – Padfoot
    quantity : 2
    unitOfMeasure : Hour
    


14. code : 7601
    description : Group 4 Self-Propelled Vibratory Steel Packer – Padfoot
    quantity : 2
    unitOfMeasure : Hour
    


15. code : 7700
    description : Group 3 Farm Tractor – Wheel c/w Disc, Harrows, and Seeder
    quantity : 2
    unitOfMeasure : Hour
    


16. code : 7701
    description : Group 3 Farm Tractor – Wheel
    quantity : 2
    unitOfMeasure : Hour
    


17. code : 7702
    description : Group 3 Farm Tractor – Wheel
    quantity : 2
    unitOfMeasure : Hour
    


18. code : 7703
    description : Group 3 Farm Tractor – Wheel
    quantity : 2
    unitOfMeasure : Hour
    


19. code : 7800
    description : Straight Truck - Tandem Axle End Dump (min. box capacity 7 cu. m)
    quantity : 64
    unitOfMeasure : Hour
    


20. code : 7810
    description : Group 3 Articulated Dump Truck
    quantity : 4
    unitOfMeasure : Hour
    


21. code : 8020
    description : Traffic Control Flag Person
    quantity : 2
    unitOfMeasure : Hour
    


22. code : 8021
    description : Labourer
    quantity : 2
    unitOfMeasure : Hour
    

Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.